You are here: Home / News / Industry News / Hinges classified by place of use

Hinges classified by place of use

Update:29-06-2018
Summary:

1.General hinge This is the usual hinge we often talk a […]

1.General hinge
This is the usual hinge we often talk about. It can be used for cabinet doors, windows, doors, etc. Hinge, from the material can be divided into: iron, copper, stainless steel. From the specification can be divided into: 2 "(50mm), 2.5" (65mm), 3" (75mm), 4" (100mm), 5" (125mm), 6" (150mm), 50-65mm hinge suitable for Cabinets, wardrobe doors, 75mm for windows, screen doors, 100-150mm for doors in the doors, aluminum doors. The disadvantage of common hinges is that they do not have the function of spring hinges. After installing the hinges, they must be fitted with various ball bearings, otherwise the wind will blow the door. There are also special hinges such as detachable hinges, flag hinges, H hinges, etc. They can be disassembled and installed according to various special needs of the wooden door. It is very convenient. When used, it is limited by the direction of the left and right.

2. The door hinge
It is divided into common type and bearing type. The ordinary type has already been mentioned above. The bearing type is now emphasized. The bearing type can be divided into copper and stainless steel from the material. Divided from the specifications: 100X75 125X75 150X90 100X100 125X100 150X100 Thickness 2.5mm, 3mm bearings have two bearings, four bearings. From the point of view of consumption, copper bearing hinges are used more, because of their beautiful, bright, affordable, and equipped with screws.

3. Electromechanical cabinet hinge
It includes high wear-resistant nylon hinges; corrosion-resistant, high-strength zinc alloy hinges, hinges; corrosion-resistant, oxidation-resistant, high-strength stainless steel hinges, often used in electromechanical cabinet doors, mechanical equipment operation boxes and other products .

4. Heavy Duty Hinge
Because of the particularity of the installation location, the requirements for the hinge are also very large. The general dimensions are more than 150mm, the bearing weight is relatively large, and the exterior structure conforms to the special structure of the cabinet door. It is often used in cold stores, refrigerators and other large doors, mostly zinc. Alloy material.

5. Shaped hinge
Also for hinge hinges, the door opening angle is large, and it is also widely used in daily use.

6. Other hinges
There are table hinges, flap hinges, glass hinges. The glass hinge is used to install the frameless glass cabinet door, and the glass thickness is required to be no more than 5-6mm. There are holes in the style, with all the properties of the spring hinge. The holes are not magnetic and top and bottom mounted, such as Pepsi, magnetic glass hinges, etc.