Media

Door positioning installation method

Update:24-02-2018
Abst:

First positioning the door frame beam on the beam, with […]

First positioning the door frame beam on the beam, with its own adjustment screw out of the beam plane 1-2mm. Reinforce the glass door, align the hole of the pivot pin connector in the crossbar of the door leaf with the pivot pin of the ground spring, and rotate the door leaf to insert the hole into the pin. Then the axis of the pin, the door rotated 90 degrees. Pay attention to rotate the door to be right, so that the door frame and the door beam at right angles. At this moment, the hole of the rotating connector in the crossbar of the door leaf can be adjusted to the positioning pin on the crossbeam of the front door frame and the positioning pin can be pulled out and inserted into the hole of the crossbeam rotation pin connector of the door leaf about 15 mm.

https://www.jinnaike.com

0