Hinges are classified by place (1)


1. General hinge It is the general hinge we often say, […]

1. General hinge
It is the general hinge we often say, it can be used for cabinet doors, windows, doors, etc. Hinges can be divided into iron, copper and stainless steel in terms of material. From the specifications, it can be divided into: 2” (50mm), 2.5” (65mm), 3” (75mm), 4” (100mm), 5” (125mm), 6” (150mm), 50-65mm hinges are suitable for Cabinets, closet doors, 75mm for windows and screen doors, 100-150mm for wooden doors and aluminum alloy doors in the gate. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After installing the hinges, various bumpers must be installed, otherwise the wind will blow the door panel. In addition, there are special hinges such as detachable hinges, flag hinges, and H hinges. They can be disassembled and installed according to various special needs of the wooden door. It is very convenient. When used, it is restricted by the direction. There are left and right types.
2. Mechanical and electrical cabinet hinge

It includes nylon hinges with high wear resistance; corrosion-resistant, high-strength zinc alloy hinges and hinges; corrosion-resistant, oxidation-resistant, and high-strength stainless steel hinges, often used in electromechanical cabinet doors, mechanical equipment operation boxes and other products .
3. Heavy hinge
Due to the particularity of the installation position, the requirements for the hinge are also very large. The general size is above 150MM, the bearing capacity is large, and the shape and structure conform to the special structure of the cabinet door. It is often used for large doors such as refrigerators and freezers. Most of them are zinc. Alloy material
4. Shaped hinge
It is also a corner hinge with a large opening angle, which is also widely used in daily use
5. Other hinges
There are countertop hinges, flip door hinges, and glass hinges. Glass hinges are used to install frameless glass cabinet doors, and the glass thickness is required to be no more than 5-6mm. There are holes in the style and all the properties of spring hinges. Non-punched magnetic type and top and bottom mounting type, such as Pepsi, magnetic glass hinge, etc.